Ultrasonic Generator For Ultrasonic Welding, Cutting, And Sealing
Descriperson
This digital generator is available in frequencies of 15kHz, 20Khz, 28Khz,30 kHz, 35 kHz and 40Khz at a power range between 300 W and 3000 W. Programmable ramp up and ramp down times and infinitely variable adjustment of weld amplitudes are only some of the features of this product line. The biggest advantage of this generator is the wide frenquncy range, for example: the 20Khz generator, it can catch the frequency from 18~21khz, so it is easy to tuning. Also it is easy for some ultrasonic new user.
1, Adopt parallel resonance to drive the converter, reduce the heating of converter to protect it.
2, Button start, easy operation.
3, Imported control chip and driver, makes the ultrasonic generator works more reliable.
4, The frequency based on the PID control and amplitude control, frequency locking and achieve constant amplitude control as well.
5, Explosive power output,compare to traditional ultrasonic generator, our ultrasonic generator only request 1/2 cylinder pressure to achieve the same power output.
6, Amplitude soft start, ensure make use of huge mould.
7, Welding amplitude adjustment range 0~100% by 1%.
8, Multiple protection to ensure the safety of equipment and test-piece.
| Ultrasonic generator technical specification |
| Model | 15kHz | 20 kHz | 30 kHz | 35 kHz | 40 kHz |
| Operating environment | -20℃~+80℃, humidity less 70% |
| Dimension | Length 350mm, Width 12mm, Height 100mm |
| Matched converter | 15kHz | 20kHz | 30kHz | 35kHz | 40kHz |
| Power | 2200W/3200W | 2000W/2600W | 800W/1500W | 800W/1200W | 500W/800W |
| Material | Shell: aluminum alloy, Panel: 304 stainless steel, Heating panel: 6061 pure aluminum |
| Voltage | 220VAC, 50/60HZ |
| Standard parts | Ultrasonic generator, converter wire, power wire, control signal interface, DB9 core wire. |
| Optional part | Shockproof suitcase |
| | | | | | | | | | |
Application
| Application | Suitable |
| Welding | Available |
| Sealing | Available |
| Sewing | Available |
| Cutting | Available |
| Sonochemistry | Available , but not the best, If open the equipment when the horn in the liquid , it can catch the frequency well, it is better tracking the frequency without any loading. |
| Metal welding | Available , but not the best. Metal welding always in high loading , it is better use a generator with well ventilation. |
| Atomization | Available |
The maximum allowable equipment environment
Available environment temperature: -20C° to 40°C, work over temperature may cause in abnormal operation of the equipment and safety accidents.
Available air humidity: less than 70%. Excessive air humidity may cause Short circuit of the internal electronic components.
Maximum electromagnetic interference intensity: less than 120E. Larger than 120E will cause seriously interfere and damage the equipment.
Power requirements
The power input standard is: single-phase AC220V 50HZ/60HZ.
Input power supply voltage fluctuation range: <10%.
Input power supply harmonic content: <20%.
Input power supply current: 10A.
Input power cord diameter: >1.5MM2.
Product Tags:
|
|
Easy Operation Ultrasonic High Power Pulse Generator 15Khz Frequency Auto Tracking Images
|
